07:38
Mittal
Micro-Cap v9.0.7.0 Pro with Portable | 176 MB
Circuit simulation program Micro-Cap may be of interest to a wide range of people involved in or studying electronics. Primarily this program is recommended for students of electrical and radio engineering specialties, as well as amateurs and design engineers. However, for the last major shortcoming is the lack of MicroCap built-in trace printed circuit boards, as these objectives have to use third-party software.
Family programs of circuit analysis Micro-Cap enjoys enough popular among college students electronic profile. In addition, programs are family MicroCAP convenient, user-friendly interface and relatively modest requirements for software and hardware. But at the same time opportunities are quite large. Mikrokap allows us to analyze not only analog and digital devices. It is also possible and the mixed analog-digital simulation of electronic devices. Advanced users can also pack in an irregular situation to create your own macro to facilitate the simulation without loss of essential information about the behavior of the system. And almost immediately can immediately start working with a program based on analysis of samples provided with the program. In addition, MicroCAP has a demo mode, which allows us to understand the basic features and methods of work - just look at what is happening on the screen.
Full compatibility with SPICE-models and SPICE-circuits and advanced capability allows the user to convert Micro-Cap successfully use all the developments, intended to DESIGNLAB and ORCAD, and the skills of modeling, if necessary, will allow much quicker to master more complex professional modeling packages.
Content release
mc9.0.0.0 CD-Contents - folder with a copy of the original disk to install Micro-Cap 9 Professional
mc9.0.7.0 nohasp update - folder with the update to version Micro-Cap 9.0.7.0 c patched executable
mc9.0.7.0 patch - a folder with crackom for patching the original executable Micro-CAP 9.0.7.0
mc9.0.7.0 rus - Russian localization folder interface Micro-Cap 9.0.7.0
ms9 fonts ru - folder with a program to solve the problem with Cyrillic fonts in the status bar and tooltips
ms9 ruslib - folder with libraries of models of domestic radio components
read me.txt - instructions for installing software, changing location and add a library
mc9 portable eng - folder with a portable version of the Micro-Cap 9.0.7.0 c English interface
mc9 portable rus - folder with a portable version of the Micro-Cap 9.0.7.0 c Russian interface
Instructions for installing and cracking Micro-Cap 9.0.7.0
1. In the folder mc9.0.0.0 CD-Contents is the contents of the original installation CD Micro-Cap 9.
2. Install Micro-Cap 9.0.0.0 Professional (run the file setup.exe and follow the instructions, choosing to install the version of the Professional Version dialog box Setup Type). After installing directly Micro-Cap 9 is automatically installed program checks the security Hasp-key.
3. After installation, copy (with replacement) available in the folder containing the Micro-Cap 9, all the files in the folder mc9.0.7.0 nohasp update. This will been upgraded to version 9.0.7.0 (updated executable files, help files and documentation) with a simultaneous test Hasp-lock key.
User Russification Micro-Cap 9.0.7.0
1. Run the program.
2. Copy the contents of the folder mc9.0.7.0 rus (file mc9ru.dll and mc9rus.dll) in the folder containing the Micro-Cap.
3. Launch Micro-Cap, in the main menu, choose Options -> Preferences (User Setup).
4. Select International Settings, and in it - an option the interface - the Russian or English / Russian. "( Russian - version with Russian interface and Russian information line, hint, English / Russian - version with an English interface and Russian information line, hint). Also here at any time to return to full English localization program.
5. Reload this Micro-Cap.
6. Pay attention! Russian words longer than the English. So, to all the information housed in a row, it is recommended to reduce the font size of the information line. To do this you must again go to Options -> Preferences (User Setup), select the Status bar (Information line) and decrease the font size (for example, to install Arial 9). Attention! This pack is intended only for the version of the Micro-Cap 9.0.7.0!!!
7. In some cases, after the Russification of the possible problem with displaying Cyrillic fonts in the status bar and tips. This problem can occur for some users (not all) and depends on regional settings, change the code page in the registry, font substitutions, etc. In the folder ms9 fonts ru is a "cure" (a program to remedy the Russian fonts), using which do not have to make any changes to the system. To use it you need to file ru-conf.ini in line App specify the full path to the executable file (mc9.exe), (including file name). After that, run the Micro-Cap 9 is important to use the file ru-start.exe. The program is written by students of Marina Amelin. Thanks to Ivan Korneev (PE-05 group of Smolensk branch of Moscow Power Engineering Institute)! Attention! After closing the Micro-Cap system returns to its original state. It follows that the Micro-Cap to run every time with this "medicine".
8. Interested parties can add to the library of models of domestic radio components. But at the same time keep in mind that "... domestic manufacturers of electronic components of SPICE-model in the technical documentation does not lead. Library of domestic content, which can be found on the Internet, is the development of enthusiasts, but their accuracy and adequacy is by no means guaranteed. As a rule, it renamed SPICE-model foreign counterparts. So look for a model of domestic components is hardly advisable - you should immediately seek at once a model of the foreign counterpart. But in the simulation should be remembered that the results may differ from those that will occur in the actual circuit, the collected of domestic content ...".
To add the libraries you need:
8.1. Copy the library files with the extension. Lib folder of mc9 ruslib in the subdirectory \ library directory in which you installed the program Micro-Cap 9.
8.2. Open the text file nom.lib (in the subdirectory library \ directory, which is installed Micro-Cap 9) and add the lines that include the appropriate library files:
. Lib "R-DIOD.LIB"
. Lib "R-NPN.LIB"
. Lib "R-PNP.LIB"
. Lib "SOVBIPOL.LIB"
. Lib "SOVDIOD.LIB"
. Lib "SOVPOL.LIB"
. Lib "SOVSTAB.LIB"
. Lib "R-COMP.LIB"
. Lib "R-OPAMP1.LIB"
. Lib "R-OPAMP2.LIB"
. Lib "R-OPAMP3.LIB"
. Lib "X-OPAMP.LIB"
8.3. Save the file nom.lib with the changes made.
8.4. Launch Micro-Cap 9.
8.5. Now, after adding circuit components (transistors, diodes), a box set of parameters in the MODEL in the list of models can be found corresponding to the domestic components. After that window closes attributes, and the scheme appears appropriate component. However, in such a way to add components not present in the hierarchical menu selection.
In a similar way, you can add any other library items that can be found on the Internet.
Explanations for the portable version
Portable version of the Micro-Cap 9.0.7.0 made using Xenocode Virtual Application Studio 2010. Despite the small amount of the final application file (about 19 MB) Portable versions contain the full version of Micro-Cap 9.0.7.0 - all the libraries, all the examples, help files and user guides.
When the program starts in the current folder is created the "sandbox" (a folder named Sandbox), in which to store all your files and settings changes that occur when using a portable version. If you do not need to store these changes - this "sandbox" can be safely removed after the close of Micro-Cap.
The executable file is a portable version supports the following command line:
mc9 - just run Micro-Cap 9.0.7.0 (default)
help - help with run Micro-Cap (mc9.hlp)
reference - the opening of a full reference guide Reference Manual (RM.pdf)
guide - a brief opening manuals User Guide (UG.pdf)
Portable versions were tested on Windows XP Pro SP3 (x86) and Windows 7 Ultimate (x64).
In case of problems with Cyrillic characters in the line of information and tips - you can use the same method as for the normal version of Micro-Cap.
Year: 2011
Name of Program: Micro-Cap
Program Version: 9.0.7.0 Pro
Treatment: Complete
Type of medicine: patch
System requirements:
Pentium II and above
60Mb of free disk space
Operating system: Windows 2000, XP or Vista
128MB RAM
SVGA monitor
Download:
Mirror 1 :
http://www.fileserve.com/file/bpy4vkh/microcap.9.0.7.0.rar
Posted in: Portable Softwares
0 comments:
Post a Comment